TECHNICAL DATA
- Max. Operating Temperature: 90°C
- Max. Short Circuit Temperature: (max. 5 sec.) 200°C
- Permanent Tensile Force: 15 N/mm2
- Production Standards: DIN/VDE 0250-813
CONSTRUCTION
Conductor: Electrolytic, stranded, tinned Class 5 copper wire DIN VDE 0295
Insulation: All cores are insulated with 3Gl3 compound (acc. to DIN VDE 0207 part 20)
Screen: ..3E coded types has individual screens made by laying up tinned copper wires over the insulation
Layup: All cores are laid up in contact with each other and interstitial ground cores
Bedding: Special elastomeric compound GM1b (acc. to DIN VDE 0207 Teil 21)
Screen: ..kon coded types has a concentric overall screen made of tinned copper wires in between inner and outer sheaths
Outer Sheath: Heavy duty elastomer outer sheath 5GM5 (acc. to DIN VDE 0207 Teil 21)
CODE of CABLE
- (N)SSHÖU
INTRODUCTION
These cables are used for dynamic or static applications in harsh settings, with or without individually earth screened cores. These cables are also flame-retardant, abrasion-resistant, cut-resistant, notch-resistant, and tear-resistant, oil and fat
resistance. Suitable for installation in dry, moist, rainy, and dangerous settings. For power supply that will be subjected to high degrees of mechanical stress and abrasion. To a depth of 100 meters, it may be submerged permanently in fresh water, salt water, storm water, oily water, and sewage-contaminated water. Suitable for both indoor and outdoor use.
SECTION RANGE
- From 1.5mm2 up to 300mm2
CONDUCTOR QUANTITY
- Three phase cores and three interstitial earth cores laid up together.
COLOUR CODE of CABLE
- Insulation Colour code could be according to the International Standards or customer’s request/demand.
NOTE: These cables should not be installed at temperatures below -40°C or above 80°C