TECHNICAL DATA
- Max. Operating Temperature: 70°C
- Rated Voltage: 300/500V
- Min. Bending Radius: 7.5x Cable Outer Diameter
- Production Standard: EN 50288-7
CONSTRUCTION
Conductor: Electrolytic, stranded, annealed plain copper
wires to IEC 60228 Class 2 (Class 1 or Class 5 and/or tinned
on request)
Insulation: PE Polyethylene compound to EN 50290-2-23
Binder Tape: Polyester foil on overall cable core formed by
stranded pairs
Collective Screen: Aluminium/polyester foil with a tinned
copper drain wire in direct contact with the metallic side of the
foil
Outer Sheath: Flame retardant PVC compound to
EN50290-2-22.
Blue for intrinsically safe cable, Black for UV resistant and/or
non-intrinsically safe cable, Gray for indoor applications
CODE of CABLE
- CU/PE/OSCR/PVC; RE-2Y(St)Y-fl (MULTIPAIR)
INTRODUCTION
These cables used for connecting instruments and control
systems for analogue or digital signal transmission for indoor
and outdoor applications, chemistry industry, petrochemistry
industry, power plants, indoors and outdoors, dry, damp and
wet environments, gas Stations, water conveyance systems.
These cables shall not be connected directly to mains electricity
supply or other low impedance sources, since they are not
designed to be used for power supply.
SECTION RANGE
- From 0.50mm2 up to 2.5mm2
CONDUCTOR QUANTITY
- From 1 pairs up to 50 pairs
COLOUR CODE of CABLE
- Insulation Colours code could be according to the
International Standards or customer’s request/demand.
* Other colours can be produced upon the customer
requests.