TECHNICAL DATA
- Max. Operating Temperature: 90°C
- Max. Short Circuit Temperature: 250°C (max. 5 sec.)
- Rated Voltage: 0,6/1kV (Um: 1200V)
- Min. Bending Radius: 15x Cable Outer Diameter
- Production Standard: IEC 60502-1, VDE 0271, BS 5467
APPLICATION
These cables refer to XLPE insulated, PVC sheathed
ARMOURED Power cables with a rated voltage of 0,6/1kV.
These cables used for electricity supply in a low voltage
installation system. They are suitable for installation
indoors, outdoors, underground, in cable ducts and power and
switching stations, local energy distributions, industrial plants,
and places where is a risk of mechanical damage. Due to having
ARMOUR, these cables can be used for heavy installation
and mounting conditions.
CONSTRUCTION
- Conductor: Stranded or Shaped Round Class 2
Aluminium conductor as per IEC 60228
For sections between 1.5mm2 – 10mm2; Solid Round Class 1
conductor can also be supplied upon request.
Insulation: XLPE insulation material. Thickness shall be as per
IEC 60502-1
Inner Sheath/Filler: PVC Inner sheath/Filler material
Armour: Galvanised Round Steel Wire Armour or Double Steel
Tape Armour or Flat Steel Wire Armour+Steel Tape Armour
* For Single Core Cables Armour should be Aluminium Wire
Armour if the cable will not be used in DC System.
Outer Sheath: PVC outer sheath material. Thickness shall be as
per IEC 60502-1.
SECTION RANGE
- From 10mm2 up to 630mm2
CODE of CABLE
- Al/ XLPE/SWA/PVC; Al/ XLPE/DSTA/PVC; NA2XRY;
NA2XFGbY; NA2XBY; YAXZ2V;YAXZ3V;YAXZ4V
CONDUCTOR QUANTITY
- From 1 Core up to 5 Cores
COLOUR CODE of CABLE
- Insulation Colours code will be according to the
International Standards or customer’s request/demand.
FIRE PERFORMANCE Of CABLE SHEATHS
- Cables can be supplied with special flame retardant PVC
outer sheath to comply with the flame test requirements of
IEC 60332 Category A-B and C.